Please factor in 3-7 Business Days for Processing and Assembly.
For the 2020+ Gladiator Only
Tool-less quick detach front and rear flaps.
Front flaps help keep mud off the body, especially the door handles. It protects against most dings and scratches along the body, but as with any worn item, it will not make you bulletproof.
Available in multiple size and length combinations to provide great coverage on stock and modified vehicles.
Mount using existing OEM mounting locations. NO cutting, drilling, or welding. (*some modification to flaps may be required depending on your trim level.)
Clears up to 40" Tires.
Lightweight and extremely durable, engineered to endure the harshest environments from the desert heat to the arctic cold.
Flexible but with a semi-rigid characteristic that allows them to retain their shape at speed and effectively block tire spray (we're not into flappy mud flaps). Also resists getting sucked into the tire.
Flaps and logos available in multiple colors. **If your logo color choice won't work, that is a custom request and you will have to leave it in the notes at checkout.
Requires unmodified OEM Front fenders.
If you either don't have the OEM Rubicon Rock Sliders and/or need to modify the flaps yourself for other rock sliders/side steps. Just make sure to leave a NOTE when ordering saying "NO PARTIALLY CUT HOLE PLEASE".
ASSORTED COLORS:Over 10 color options for ultimate personalization.
Please see our F.A.Q. Section if you have additional questions.
WHAT'S INCLUDED: Each full kit comes with 4 flaps (front and rear), heavy-duty powder coated steel brackets for the rear, a complete kit of stainless steel and rust-resistant mounting hardware, and installation instructions to fit factory hole locations.
WHAT IT FITS: 2020+ Jeep Gladiator (JT) Most trim levels including Rubicon, Mojave, Willys etc. Designed on the RUBICON fenders but will also fit the Sport, Sport S and any other non Rubicon fenders with a tiny bit of trimming (SEE FAQ BELOW)
DOESN'T FIT: High Altitude Trim Aftermarket or SPLIT/Modified OEM FENDERS Any other Jeep Model Some Non USDM models may have slight differences
4 SIZES TO CHOOSE FROM: -ORIGINAL was designed for those who like to keep a stock set up, but want some paint protection. This size is good for stock tires up to about 34 inches. -ORIGINAL LONGis the same width, but adds about 2" on the bottom edge for those who don't need/want the added width of XL but want maximum protection from wheel spray. -XLis about 1-2" wider and 1-2" longer for those who run lifts and/or higher offset wheels that poke past the fenders. This size is good for tires from about 35 inches up to about 40 inches. -XL LONG is the same width, but adds about 2" on the bottom edge for those who want maximum protection. ***PHOTOS SHOW THE XL SIZE.
Please note that this kit was designed on a stock USDM vehicle. When modifying body panels, wheels or suspension, you may have to modify the flaps to work with those changes. If you have any questions before you purchase, please see our FAQ below or email us with any questions.
COLOR OPTIONS: Rokblokz Mud Flaps are available in BLACK, RED, YELLOW, GREY, DEEP BLUE, BRIGHT BLUE, ORANGE, LIME GREEN, OLIVE DRAB, and DEEP PURPLE. Colors other than Black are considered Custom as they are made to order.
*NO RETURNS ON COLORED FLAPS Screen resolution, lighting, and surroundings all affect how colors present. If you are questioning how well the color will match, please order a color sample HERE.
Please note that a shopping cart quantity of 1 refers to the number of kits you are selecting not the number of flaps. In this listing, you are purchasing 4 mud flaps and all accompanying hardware and brackets.
FREE SHIPPING in the contiguous U.S. International shipping is available. You can see pricing in the shopping cart. Please note that International Taxes and Duties are the responsibility of the buyer and can be paid at checkout.
**Please note that aftermarket exhaust could affect the mounting of the rear brackets.**
You may also request the front flaps without the partial hole cut out if you either don't have the OEM Rubicon Rock Sliders and/or need to modify the flaps yourself for other rock sliders/side steps. Just make sure to leave a NOTE when ordering saying "NO PARTIALLY CUT HOLE PLEASE".
RokBlokz Quick Release mud flaps for the 2020+ Jeep Gladiator (JT) mud flaps are CNC laser cut from a proprietary material specifically designed to endure the harshest environments from extremely hot climates to extremely cold ones. They offer excellent protection from harsh road debris and gravel. The Gladiator (JT) kitfits all trim levels including the Sport, mid-level Sport S, luxurious Overland, the off-road-ready Rubicon and Mojave, as well as the Launch Edition.
The unique blend of polymers in our mud flaps gives them the specific ability to remain rigid enough to not flap in the wind, flexible enough to bend and give over obstacles, and durable enough to take whatever abuse you can throw at them. Rokblokz mud flaps can bend, flex, give, even scrape and drag without breakage.
TIPS & TRICKS
If you are having a hard time getting the front flaps to line up (especially with the Rubicon rock rails) please watch this short clip for extra details on how to tilt and slide the flap into place.
If you have a 2023 Mode with the 3rd tab on the fender liner bracket, you will need to make sure that the flap sits behind to two outer tabs (marked in green on the photo) and in front of the 3rd center tab (circled in red on the photo). Alternately you can place the clips on the two outer tabs with the extruded side pointing toward the center tab, rather than your flap and mount the flap on top of the fender liner. When mounting this way, you may want to add a fender washer between the thumb screw and the flap.
Mounting is the same on non-Rubicon fenders including Sport and Tow Max Fenders, however, there are a couple of additional steps to make everything play nice. First as shown in the video and photo below there are a couple of places on the fender liner that will need to be trimmed. 1.) The lip on the liner will need to be trimmed a bit so the flap can sit properly. 2.) This is optional. If you want to be able to adjust your flap in and out, you will need to cut a slot in the fender liner. Please see short video below for details.
F.A.Q's
- Do your flaps work with aftermarket fenders?
The FRONT FLAPS work with the OEM fenders ONLY. They will not mount on aftermarket fenders, modified or SPLIT OEM fenders.
The REAR FLAPS are mounted using a heavy-duty powder-coated steel bracket that is mounted to the frame so they are unaffected by modifying the fenders or running aftermarket fenders.
- Will these work with rock rails and side steps?
They are designed with the shape of the OEM Rubicon Rock Rails partially cut out, simply cut the tabs and remove the shape allowing the Rubicon Rock Rails to pass through the front flap.
Many other rock rails/side steps do not come as far forward as the OEM Rubicon sliders do and will not interfere with our mud flaps. See pics for more details. If you have the MOPAR PERFORMANCE RAILS you will either need to extend the pre-designed hole or cut your own hole as those are not the same as the stock rubicon rails.
You may also request the front flaps without the partial hole cut out if you either don't have the OEM Rubicon Rock Sliders and/or need to modify the flaps yourself for other rock sliders/side steps. Just make sure to leave a NOTE when ordering saying "NO PARTIALLY CUT HOLE PLEASE".
- Will the flaps work with aftermarket bumpers?
The REAR FLAPS are mounted using a heavy-duty powder-coated steel bracket that is mounted to the Frame so they are unaffected by running aftermarket bumpers.
- How do the flaps mount that allows them to be quickly removed?
The REAR FLAPS are mounted to a heavy-duty powder-coated steel bracket that mounts directly to the Frame of the Vehicle. This bracket makes it possible to adjust the flaps in and out to account for a range of tire size and wheel offset. Because of this bracket system, you can easily remove the flaps without any tools right on the side of a trail if needed.
- What vehicles will this kit work with?
This listing is for the 2020+ Jeep Gladiator JT only. This kit will not work for the wrangler but will work on all Gladiator trims including the Sport, mid-level Sport S, luxurious Overland, the off-road-ready Rubicon and Mojave, as well as the Launch Edition. It will also work with the Eco Diesel model with stock exhaust. ***Sport and Max Tow Fenders will require a lip on the fender liner to be trimmed for proper mounting of the Flaps.
- Can I buy only the Front or Rear set?
Front ONLY and Rear ONLY Kits are available HERE (they come with ONLY the 2 front flaps or the 2 rear flaps along with all mounting hardware, brackets, and installation instructions).
- Can I mix and match sizes?
Yes, but the pricing will be different than a whole kit in the same size. You will have to go to the individual front or rear listing and add the desired size to your cart on each listing.
We offer shipping to most countries around the world. Shipping times may vary depending on the destination country and shipping method selected at checkout. We typically process orders within 1-2 business days of receiving payment, and we will send you a tracking number once your order has been shipped.
Standard Shipping: Our standard shipping option is available for most countries and typically takes between 7-14 business days to arrive, depending on the destination.
Express Shipping: We offer express shipping to select countries. This shipping option typically takes between 3-7 business days to arrive, depending on the destination.
Customs and Fees: Please be aware that some countries may charge customs duties, taxes, or other fees on imported goods. These fees are not included in our prices or shipping costs, and are the responsibility of the customer. We are not responsible for any delays or additional fees incurred due to customs clearance processes.
Delivery Time - Domestic
Typically, your package should reach you within 2-9 days of placing an order.
The answer to this question depends on what shipping service is used or selected. Included shipping is most often done through USPS Priority or FedEx which is not a guaranteed service but estimated at 2-4 days depending on how far away from Utah it is traveling. For larger packages, we use FedEx/UPS GROUND or SUREPOST. These services are estimated at 3-5 days and 5-7 days respectively.
We do offer expedited shipping options, but please remember that those estimations are not including the processing time, which is usually 24 hours or less except on weekends. However, those times can be affected by weather.
Delivery Time - International
Internationally, this depends on multiple factors such as destination, carrier and selected service. Our normal handling time is about 24 hours, except on weekends and Holidays when we are not in the office. With any shipping service, domestic or international, weather can cause delays in shipping. This type of delay is with the Carrier.
FedEx is a great option for most parts of the world. The fee includes clearance through customs and is pretty fast. In most cases it is around 3-5 days for delivery. Please note that you will still be responsible for any import taxes.
UPS is a great option to Canada, but quite pricey for other parts of the world. The standard service is estimated at about 9 business days. UPS offers faster services that can be delivered in as little as one day. If an expedited service is selected, please note that it is only guaranteed if UPS processes it through Customs. If you assign a different agent, the service is no longer a guaranteed service. There is an additional clearance fee as well as import taxes.
***Please note that with all international shipments, import taxes are the responsibility of the buyer.
We try to help when delays in delivery happen, but we cannot issue a refund on any portion of shipping unless the carrier approves a refund on shipping charges paid on our end.
All packages ship to the address that was entered on our web site, www.rokblokz.com. This is the address customers save as their shipping to location when the account is set-up. Please note that if you use PayPal to pay, we do not use the address that you save/use in PayPal to ship your order(s). Our fulfillment team does its best to adapt order changes when requested well ahead of the start of the following business day; however we are unable to guarantee that updates will be made prior to shipping. You may send us an email, enter order notes on the web site or through PayPal; however this does not mean that changes can or will be made. We encourage you to double check your order before hitting submit and to update your www.rokblokz.com account to avoid processing delays.
RokBlokz Rally Mud Flaps are warranted to be free of defects in material prior to installation and use (some light scratches may be present from the manufacturing process and are not considered to be defects). If a defective product is encountered, you must contact us within 45 days from the date of purchase to be considered for replacement. Our sole liability under this warranty is limited to replacing the defective product. Any/all shipping costs are the responsibility of the customer. This warranty shall not apply to any product which has been damaged by improper usage, accident, neglect, alteration, high stress driving, or abuse. In no event will we be liable for special or consequential damages to any property, buyer, user, or another person.
Once you receive your order, please open the shipping box and inspect its contents immediately. Any damage or missing parts claims must be made prior to installation. If there are any problems with your order, please contact us immediately at support@rokblokz.com. Be sure to include your order # and photos of damage (include packaging) or the entire contents you received, so we can confirm missing items. If hardware, please lay out all pieces, so all can be seen and counted, that way we can get all missing pieces right away. This type of Warranty Claim must be made within 45 days of order date.
Products sold by ROKBLOKZ are covered by this Standard Return Policy and must be returned within 30 days of the original invoice date for a refund or exchange. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. Return shipping is the responsibility of the buyer. Items are eligible for return only if they are unopened and in NEW condition. Products received without an RMA # will be refused.
